This project is designed to demonstrate the technology used in metro train movement which are used in most of the developed countries.
This train is equipped with a controller that enables the automatic running of the train from one station to another.This proposed system is an autonomous train and it eliminates the need of any driver. Thus, any human error is ruled out. In this project ARM 7 has been used as CPU. Whenever the train arrives at the station it stops automatically, as sensed by an IR sensor. Then the door opens automatically so that the passengers can go inside the train .It is equipped with a passenger counting section, which counts the number of passengers leaving and entering the train. There should be a passenger limit for example 10 passengers is the limit – after 10 passengers getting into the train the doors will be automatically closed.
(Additional Shipping charges may incur)
The abstract contain basic description about the project.
The presentation contains Powerpoint Slides about the project.
Name | Qty. | Price | Link | Alt. Link |
---|---|---|---|---|
Resistor 150R | 4 | 4 | ||
Resistor 330R | 12 | 12 | ||
Resistor 1K | 7 | 7 | ||
Resistor 10K | 3 | 3 | ||
Resistor 2.2K | 5 | 5 | ||
10K PRESET | 4 | 100 | ||
Capacitor 1000uF/35V | 1 | 5 | ||
Capacitor 10uF/63V | 2 | 4 | ||
Capacitor 33pF Ceramic | 2 | 2 | ||
7805 | 1 | 15 | ||
AT89S52 | 1 | 350 | ||
L293D | 2 | 70 | ||
16 Pin BASE | 2 | 16 | ||
40 Pin BASE | 1 | 10 | ||
1N4007 | 1 | 1 | ||
BC547 | 9 | 162 | ||
LED-RED | 4 | 24 | ||
LED-GREEN | 1 | 6 | ||
IR LED | 4 | 20 | ||
PHOTO DIODE | 4 | 20 | ||
7-SEGMENT COMMON ANODE | 2 | 36 | ||
CRYSTAL 11.0592MHz | 1 | 20 | ||
HEAT SINK | 1 | 22 | ||
SCREW NUT FOR HEAT SINK | 1 | 15 | ||
MALE BURGE 2-PIN | 2 | 24 | ||
MALE RELIMATE 2-PIN | 1 | 24 | ||
FEMALE RELIMATE 2-PIN ONE SIDE | 1 | 12 | ||
2 PIN PUSH BUTTON | 1 | 12 | ||
BUZZER | 1 | 150 | ||
MALE RELIMATE 5-PIN | 1 | 15 | ||
FEMALE RELIMATE ONE SIDE 5-PIN | 1 | 18 | ||
CD DOOR MOTOR | 1 | 250 | ||
BATTERY 12V (6V X 2) | 1 | 350 | ||
ROBO SPARE PARTS SET (INCLUDING 2 12V DC MOTORS) | 1 | 250 | ||
SPANNER 20/22 | 1 | 30 | ||
SPST SWITCH (ON/OFF) | 1 | 10 | ||
SCREW NUTS | 1 | 15 | ||
BATTERY CLAMP (FIXING BATTERIES) | 1 | 10 | ||
104PF | 4 | 8 | ||
ASSEMBLED PCB (WORKING) | 1 | 3000 | ||
PLAIN PCB | 1 | 25 | ||
ZERO BOARD | 1 | 25 | ||
SOLDERING IRON | 1 | 220 | ||
CUTTER | 1 | 35 | ||
MULTIMETER | 1 | 150 | ||
SCREW DRIVER | 1 | 15 | ||
SOLDERING LED (50 gm) | 1 | 50 | ||
CONNECTING WIRE | 1 | 25 | ||
RIBBON WIRE FOR ZERO BOARD | 1 | 10 |
You could choose to buy all the components individually or buy the complete kit.
You will have to personally come to our offices to pick your project up if you Buy Offline, alternatively you can Buy Online and your project kit will be shipped to you.