The project is designed to develop a four quadrant control system for a DC motor. The motor is operated in four quadrants i.e. clockwise; counter clock-wise, forward brake and reverse brake.
The four quadrant operation of the dc motor is best suited for industries where motors are used and as per requirement as they can rotate in clockwise, counterclockwise and also apply brakes immediately in both the directions. In case of a specific operation in industrial environment, the motor needs to be stopped immediately. In such scenario, this proposed system is very apt as forward brake and reverse brake are its integral features .
(Additional Shipping charges may incur)
|0.1uF (104) Ceramic||2||4|
|16 Pin BASE||1||8|
|14 Pin BASE||1||8|
|08 Pin BASE||2||16|
|SCREW NUT FOR HEAT-SINK||1||15|
|MALE BERGE 2-PIN||1||12|
|FEMALE BERGE 2-PIN||1||12|
|MALE RELIMATE 2-PIN||1||12|
|FEMALE RELIMET 2-PIN ONE SIDE||1||8|
|12V 2C0 RELAY||2||70|
|12V HIGH SPEED MOTOR||1||350|
|HIGH SPEED MOTOR FAN||1||25|
|2-PIN PUSH BUTTON||4||40|
|SOLDERING LED (50 gm)||1||50|
|RIBBON WIRE FOR ZERO BOARD||1||35|
You could choose to buy all the components individually or buy the complete kit.
You will have to personally come to our offices to pick your project up if you Buy Offline, alternatively you can Buy Online and your project kit will be shipped to you.